Oilgae Comprehensive Report

Recommended lighting for vertical tube reactors?

Discusses PBR design, various types of PBRs, case studies, costs...

Recommended lighting for vertical tube reactors?

Postby alsetn » Tue Feb 24, 2009 2:20 am

I have been reviewing high output fluorescent lights, T5HO, as a controllable light source. Any other recommendations or spectrum preferences?
Thanks.
alsetn
 
Posts: 2
Joined: Tue Feb 24, 2009 2:08 am

Re: Recommended lighting for vertical tube reactors?

Postby rlantis » Fri May 22, 2009 6:50 pm

Based upon your post, I'm assuming that your PBR is not intended to be solar-based.
So, while various algal species can be characterized by differing PUR as a function of wavelength, none-the-less you'll find that your quasi-broadband sources (such as you mentioned) are usually less efficient in terms of electrical costs. For optimum electrical and biomass yield efficiencies, one requires a consideration of the best photo-absorption band for your particular species of interest. Based upon this information, then choose the light source that can best deliver those (usually narrow) wavelengths. There are always a multitude of trade-offs that effect the bottom-line of any PSII biomass production process, and the selection of light source is arguably one of the more important.
rlantis
 
Posts: 5
Joined: Thu May 14, 2009 4:31 pm
Location: Asheville, NC USA


Return to Photobiroeactors

Who is online

Users browsing this forum: No registered users and 1 guest

cron