Oilgae Comprehensive Report

Do photobioreactors get overheated?

Discusses PBR design, various types of PBRs, case studies, costs...

Do photobioreactors get overheated?

Postby cacofonix » Fri Jan 30, 2009 6:48 am

I read somewhere that photobioreactors could get overheated and need to be cooled often. Is this true?
cacofonix
Site Admin
 
Posts: 141
Joined: Tue Jun 10, 2008 2:52 pm

Re: Do photobioreactors get overheated?

Postby rlantis » Fri May 22, 2009 8:15 pm

Since most algal species of interest do exhibit a temperature-based correlation with growth/yield rate, many times the economics of the process necessitates a tight control of temperature optimization.

In the end, it all comes down to the economics in order to determine what a particular process would consider as "over-heating" (as well as "under-heating"). A well-designed process will maximize the temperature benefit while simultaneously taking advantage of other related issues. Through these inter-related processes, an integrated approach that considers all requirements and available resources offers the optimum solution.
rlantis
 
Posts: 5
Joined: Thu May 14, 2009 4:31 pm
Location: Asheville, NC USA

Re: Do photobioreactors get overheated?

Postby Asen Nenov » Wed May 27, 2009 2:19 am

The question is so general that it is difficult to answer. The overheating is connected with inability to dissipate the heat - for example lack of heat transfer for some reason. One obvious reason may be that the environment temperature is high.

If we are talking about outside placed closed airlift or bubble column PBR, they could overheat because of the solar irradiation. This is why when placing these PBRs outside, it is a good idea to cover them with a tent and measure the temperature for a period of time.... Or to select a different strain - known for surviving high temperatures.
Asen Nenov
 
Posts: 4
Joined: Sat Feb 14, 2009 2:14 pm

Re: Do photobioreactors get overheated?

Postby ecoduna » Mon May 02, 2011 8:42 pm

Of course this is possible. In my opinion, it's much more expensive to cool the reactor in summer than to keep it warm in winter. The company i'm working in has created
a fantastic concept - large, flat panel systems within a greenhouse made of foile ... check it out at http://www.ecoduna.com
We are building the world's biggest system with nearly 90.000 litres ...

======================
Oilgae does not guarantee the safety or suitability of links posted in forum messages
ecoduna
 
Posts: 1
Joined: Mon May 02, 2011 8:31 pm


Return to Photobiroeactors

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest