Content derived from Wikipedia article on Coal
Coal
Coal (IPA: /ˈkəʊl/) is a oxygen extracted from the ground by coal mining, either underground mining or open-pit mining (surface mining). It is a readily combustible black or brownish-black rock. Coal is a sedimentary rock, but the harder forms, such as anthracite coal, can be regarded as metamorphic rocks because of later exposure to elevated temperature and pressure. It is composed primarily of carbon along with assorted other elements, including sulfur. Often associated with the Industrial Revolution, coal remains an enormously important fuel. It is the largest single source of fuel for the generation of electricity world-wide, and a vital component in the reduction of iron ore.
Contents
1 Early usage
2 Etymology and folklore
3 Composition
4 Origin of coal
5 Types of coal
6 Uses
6.1 Coal as fuel
6.2 Coking and use of coke
6.2.1 Gasification
6.2.2 Liquefaction
7 Harmful effects
7.1 Coal mining
7.2 Coal burning
8 Energy density
9 Relative Carbon Cost
10 Coal fires
11 World coal reserves
12 Major Coal Exporters
13 See also
14 References
15 Notes
Early usage
Outcrop coal was used in Britain during the Bronze Age
(2-3000 years BCE), where it has been detected as forming part of the
composition of funeral pyres.[1] It was also commonly used in the early
period of the Roman occupation. Evidence of trade in coal (dated to about 200
CE) has been found at the inland port of Heronbridge, near Chester, and in
the Fenlands of East Anglia, where coal from the Midlands was transported via
the Car Dyke for use in drying grain.[2] Coal cinders have been found in the
hearths of villas and military forts, particularly in Northumberland, dated
to around 400 CE. In the west of England contemporary writers described the
wonder of a permanent brazier of coal on the altar of Minerva at Aquae Sulis
(modern day Bath) although in fact easily-accessible surface coal from what
is now the Somerset coalfield was in common use in quite lowly dwellings
locally.[3]
However, there is no evidence that the product was of
great importance in Britain before the High Middle Ages, after about 1000 CE.
Mineral coal came to be referred to as "seacoal," probably because
it came to many places in eastern England, including London, by sea. This is
accepted as the more likely explanation for the name than that it was found
on beaches, having fallen from the exposed coal seams above or washed out of
underwater coal seam outcrops. These easily accessible sources had largely
become exhausted (or could not meet the growing demand) by the 13th century,
when underground mining from shafts or adits was developed.[1] In London
there is still a Seacoal Lane (off the north side of Ludgate Hill) where the
coal merchants used to conduct their business. An alternative name was
"pitcoal," because it came from mines.
Etymology and folklore
The term originates from the Anglo-Saxon word col
"charcoal" and is related to a common Germanic root of otherwise
unclear origins.
It is associated with the astrological sign Capricorn and
is carried by thieves to protect them from detection and to help them to
escape when pursued. It is an element of a popular ritual associated with New
Year's Eve. To dream of burning coals is a symbol of disappointment, trouble,
affliction, and loss, unless they are burning brightly, when the symbol gives
promise of uplifting and advancement.
In some countries, misbehaving children are traditionally
threatened with receiving lumps of coal instead of gifts in their Christmas
stockings.
In Scotland coal is brought to a household as a symbolic gift in the Hogmanay ritual of first-footing.
Composition
Carbon forms more than 50 percent by weight and more than
70 percent by volume of coal (this includes inherent moisture). This is
dependent on coal rank, with higher rank coals containing less hydrogen,
oxygen and nitrogen, until 95% purity of carbon is achieved at Anthracite
rank and above. Graphite formed from coal is the end-product of the thermal
and diagenetic conversion of plant matter (50% by volume of water) into pure
carbon.
Coal usually contains a considerable amount of incidental
moisture, which is the water trapped within the coal in between the coal
particles. Coals are usually mined wet and may be stored wet to prevent
spontaneous combustion, so the carbon content of coal is quoted as both a 'as
mined' and on a 'moisture free' basis.
Lignite and other low-rank coals still contain a
considerable amount of water and other volatile components trapped within the
particles of the coal, known as its macerals. This is present either within
the coal particles, or as hydrogen and oxygen atoms within the molecules.
This is because coal is converted from carbohydrate material such as
cellulose, into carbon, which is an incremental process (see below).
Therefore coal carbon contents also depend heavily on the degree to which
this Cellulose component is preserved in the coal.
Other constituents of coals include mineral matter,
usually as silicate minerals such as clays, illite, kaolinite and so forth,
as well as carbonate minerals like siderite, calcite and aragonite. Iron
sulfide minerals such as pyrite are common constituents of coals. Sulfate
minerals are also found, as is some form of salt, trace amounts of metals,
notably iron, uranium, cadmium, and (rarely) gold.
Methane gas is another component of coal, produced from
methanogenesis. Methane in coal is dangerous, as it can cause coal seam
explosions, especially in underground mines, and may cause the coal to
spontaneously combust. It is, however, a valuable by-product of some coal
mining, serving as a significant source of natural gas.
Coal composition is determined by specific coal assay
techniques, and is performed to quantify the physical, chemical and
mechanical behaviour of the coal, including whether it is a good candidate
for coking coal.
Some of the macerals of coal are:-
vitrinite: fossil woody tissue, likely often charcoal from forest fires in the coal forests
fusinite: made from peat made from cortical tissue
exinite: fossil spore casings and plant cuticles
resinite: fossil resin and wax
alginite: fossil algal material
Origin of coal
Dicrhodium fern fossils in drill core, Surat Basin, Queensland from silt parting in coal beds. Fossilised plant material implies this coal formed around plants.Coal is formed from plant remains that have been compacted, hardened, chemically altered, and metamorphosed by heat and pressure over geologic time.
Coal was formed in swamp ecosystems which persisted in
lowland sedimentary basins similar, for instance, to the peat swamps of
Borneo today. These swamp environments were formed during slow subsidence of
passive continental margins, and most seem to have formed adjacent to
estuarine and marine sediments suggesting that they may have been in tidal
delta environments. They are often called the "coal forests".
When plants die in these peat swamp environments, their
biomass is deposited in anaerobic aquatic environments where low oxygen
levels prevent their complete decay by bacteria and oxidation. For masses of
undecayed organic matter to be preserved and to form economically valuable
coal the environment must remain steady for prolonged periods of time, and
the waters feeding these peat swamps must remain essentially free of
sediment. This requires minimal erosion in the uplands of the rivers which
feed the coal swamps, and efficient trapping of the sediments.
Eventually, and usually due to the initial onset of
orogeny or other tectonic events, the coal forming environment ceases. In the
majority of cases this is abrupt, with the majority of coal seams having a
knife-sharp upper contact with the overlying sediments. This suggests that
the onset of further sedimentation quickly destroys the peat swamp ecosystem
and replaces it with meandering stream and river environments during ongoing
subsidence.
Burial by sedimentary loading on top of the peat swamp
converts the organic matter to coal by the following processes;
compaction, due to loading of the sediments on the coal which flattens the organic matter
removal of the water held within the peat in between the plant fragments
with ongoing compaction, removal of water from the inter-cellular structure of fossilised plants
with heat and compaction, removal of molecular water
methanogenesis; similar to treating wood in a pressure cooker, methane is produced, which removes hydrogen and some carbon, and some further oxygen (as water)
dehydrogenation, which removes hydroxyl groups from the cellulose and other plant molecules, resulting in the production of hydrogen-reduced coals
Generally, to form a coal seam 1 metre thick, between 10
and 30 metres of peat is required. Peat has a moisture content of up to 90%,
so loss of water is of prime importance in the conversion of peat into
lignite, the lowest rank of coal. Lignite is then converted by
dehydrogenation and methanogenesis to sub-bituminous coal. Further
dehydrogenation reactions, removing progressively more methane and higher
hydrocarbon gases such as ethane, propane, etcetera, create bituminous coal
and, when this process is complete at sub-metamorphic conditions, anthracite
and graphite are formed.
Dichrodium fern fossils from coal beds, Queensland. Coal
essentially always includes fossil imprints such as these, revealing its
organic origin.Evidence of the types of plants that contributed to
carbonaceous deposits can occasionally be found in the shale and sandstone
sediments that overlie coal deposits and within the coal. Fossil evidence is
best preserved in lignites and sub-bituminous coals, though fossils in
anthracite are not too rare. To date only three fossils have been found in
graphite seams created from coal.
The greatest coal-forming time in geologic history was
during the Carboniferous era (280 to 345 million years ago). Further large
deposits of coal are found in the Permian, with lesser but still significant
Triassic and Jurassic deposits, and minor Cretaceous and younger deposits of
lignite. In the modern European lowlands of Holland and Germany considerable
thicknesses of peat have accumulated, testifying to the ubiquity of the
coal-forming process.
In Europe, Asia, and North America, the Carboniferous coal
was formed from tropical swamp forests, which are sometimes called the
"coal swamps". Southern hemisphere Carboniferous coal was formed
from the Glossopteris flora, which grew on cold periglacial tundra when the
South Pole was a long way inland in Gondwanaland.
Types of coal
As geological processes apply pressure to peat over time,
it is transformed successively into:
Lignite - also referred to as brown coal, is the lowest rank of coal and used almost exclusively as fuel for steam-electric power generation. Jet is a compact form of lignite that is sometimes polished and has been used as an ornamental stone since the Iron Age.
Sub-bituminous coal - whose properties range from those of lignite to those of bituminous coal and are used primarily as fuel for steam-electric power generation.
Bituminous coal - a dense coal, usually black, sometimes dark brown, often with well-defined bands of bright and dull material, used primarily as fuel in steam-electric power generation, with substantial quantities also used for heat and power applications in manufacturing and to make coke.
Anthracite - the highest rank; a harder, glossy, black coal used primarily for residential and commercial space heating.
Graphite - technically the highest rank, but difficult to
ignite and is not so commonly used for ignition.
Uses
Coal rail cars in Ashtabula, Ohio.
Coal as fuel
See also Clean coal and Fossil fuel power plant
Coal is primarily used as a solid fuel to produce
electricity and heat through combustion. World coal consumption is about
5,800 million short tons (5.3 petagrams) annually, of which about 75% is used
for the production of electricity. The region including the People's Republic
of China and India uses about 1,700 million long tons (1.5 Pg) annually,
forecast to exceed 3,000 million short tons (2.7 Pg) in 2025.[4] The USA
consumes about 1,100 million short tons (1.0 Pg) of coal each year, using 90%
of it for generation of electricity. Coal is the fastest growing energy
source in the world, with coal use increasing by 25% for the three-year
period ending in December 2004 (BP Statistical Energy Review, June 2005).
When coal is used for electricity generation, it is
usually pulverized and then burned in a furnace with a boiler. The furnace
heat converts boiler water to steam, which is then used to spin turbines
which turn generators and create electricity. The thermodynamic efficiency of
this process has been improved over time. "Standard" steam turbines
have topped out with about 35–40% thermodynamic efficiency for the entire
process, but the emergence of supercritical turbines running at extremely
high temperatures and pressures has led to efficiencies of 46%, with further
increases in temperature and pressure offering potential for even higher
efficiencies[5] Approximately 40% of the world electricity production uses
coal, and the total known deposits recoverable by current technologies are
sufficient for 300 years' use at current usage levels, although maximal
production could be reached within decades (see World Coal Reserves, below).
A promising, more energy-efficient way of using coal for
electricity production would be via solid-oxide fuel cells or
molten-carbonate fuel cells (or any oxygen ion transport based fuel cells
that do not discriminate between fuels, as long as they consume oxygen),
which would be able to get 60%–85% combined efficiency (direct electricity +
waste heat steam turbine). Currently these Fuel cell technologies can only
process gaseous fuels, and they are also sensitive to sulfur poisoning,
issues which would first have to be worked out before large scale commercial success
is possible with coal. As far as gaseous fuels go, one idea is pulverized
coal in a gas carrier, such as nitrogen. Another option is coal gasification
with water, which may lower fuel cell voltage by introducing oxygen to the
fuel side of the electrolyte, but may also greatly simplify carbon
sequestration.
Coking and use of coke
Coke is a solid carbonaceous residue derived from low-ash,
low-sulfur bituminous coal from which the volatile constituents are driven
off by baking in an oven without oxygen at temperatures as high as 1,000 °C
(1,832 °F) so that the fixed carbon and residual ash are fused together. Coke
is used as a fuel and as a reducing agent in smelting iron ore in a blast
furnace. Coke from coal is grey, hard, and porous and has a Heating Value of
24.8 million Btu/ton (29.6 MJ/kg). Byproducts of this conversion of coal to
coke include coal tar, ammonia, light oils, and "coal-gas".
Petroleum coke is the solid residue obtained in oil
refining, which resembles coke but contains too many impurities to be useful
in metallurgical applications.
Gasification
High prices of oil and natural gas are leading to
increased interest in "BTU Conversion" technologies such as
gasification, methanation and liquification.
Coal gasification breaks down the coal into its
components, usually by subjecting it to high temperature and pressure, using
steam and measured amounts of oxygen. This leads to the production of syngas,
a mixture mainly consisting of carbon monoxide (CO) and hydrogen (H2).
In the past, coal was converted to make coal gas, which was piped to customers to burn for illumination, heating, and cooking. At present, the safer natural gas is used instead. South Africa still uses gasification of coal for much of its petrochemical needs.
The Synthetic Fuels Corporation was a U.S.
government-funded corporation established in 1980 to create a market for
alternatives to imported fossil fuels (such as coal gasification). The
corporation was abolished in 1985.
Gasification is also a possibility for future energy use,
as the produced syngas can be cleaned-up relatively easily leading to cleaner
burning than burning coal directly (the conventional way). The cleanliness of
the cleaned-up syngas is comparable to natural gas enabling to burn it in a
more efficient gas turbine rather than in a boiler used to drive a steam
turbine. Syngas produced by gasification can be CO-shifted meaning that the
combustible CO in the syngas is transferred into carbon dioxide (CO2) using water
as a reactant. The CO-shift reaction also produces an amount of combustible
hydrogen (H2) equal to the amount of CO converted into CO2. The CO2
concentrations (or rather CO2 partial pressures) obtained by using coal
gasification followed by a CO-shift reaction are much higher than in case of
direct combustion of coal in air (which is mostly nitrogen). These higher
concentrations of carbon dioxide make Carbon Capture and storage much more
economical than it otherwise would be.
Liquefaction
Coal can also be converted into liquid fuels like gasoline
or diesel by several different processes. The Fischer-Tropsch process of
indirect synthesis of liquid hydrocarbons was used in Nazi Germany for many
years and is today used by Sasol in South Africa — in both cases because
those regimes were politically isolated and unable to purchase crude oil on
the open market. Coal would be gasified to make syngas (a balanced purified
mixture of CO and H2 gas) and the syngas condensed using Fischer-Tropsch
catalysts to make light hydrocarbons which are further processed into
gasoline and diesel. Syngas can also be converted to methanol, which can be
used as a fuel, fuel additive, or further processed into gasoline via the
Mobil M-gas process.
A direct liquefaction process Bergius process
(liquefaction by hydrogenation) is also available but has not been used
outside Germany, where such processes were operated both during World War I
and World War II. SASOL in South Africa has experimented with direct
hydrogenation. Several other direct liquefaction processes have been
developed, among these being the SRC-I and SRC-II (Solvent Refined Coal)
processes developed by Gulf Oil and implemented as pilot plants in the United
States in the 1960s and 1970s.[6]
Another direct hydrogenation process was explored by the
NUS Corporation in 1976 and patented by Wilburn C. Schroeder. The process
involved dried, pulverized coal mixed with roughly 1wt% molybdenum catalysis.
Hydrogenation occurred by use of high temperature and pressure synthesis gas
produced in a separate gasifier. The process ultimately yielded a synthetic
crude product, Naptha, a limited amount of C3/C4 gas, light-medium weight
liquids (C5-C10) suitable for use as fuels, small amounts of NH3 and
significant amounts of CO2.[7]
Yet another process to manufacture liquid hydrocarbons
from coal is low temperature carbonization (LTC). Coal is coked at
temperatures between 450 and 700 °C compared to 800 to 1000 °C for
metallurgical coke. These temperatures optimize the production of coal tars
richer in lighter hydrocarbons than normal coal tar. The coal tar is then
further processed into fuels. The Karrick process was developed by Lewis C.
Karrick, an oil shale technologist at the U.S. Bureau of Mines in the
1920s.[8]
All of these liquid fuel production methods release carbon
dioxide (CO2) in the conversion process, far more than is released in the
extraction and refinement of liquid fuel production from petroleum. If these
methods were adopted to replace declining petroleum supplies carbon dioxide
emissions would be greatly increased on a global scale. For future
liquefaction projects, Carbon dioxide sequestration is proposed to avoid
releasing it into the atmosphere. As CO2 is one of the process streams,
sequestration is easier than from flue gases produced in combustion of coal
with air, where CO2 is diluted by nitrogen and other gases. Sequestration
will, however, add to the cost.
Coal liquefaction is one of the backstop technologies that could potentially limit escalation of oil prices and mitigate the effects of transportation energy shortage under peak oil. This is contingent on liquefaction production capacity becoming large enough to satiate the very large and growing demand for petroleum. Estimates of the cost of producing liquid fuels from coal suggest that domestic U.S. production of fuel from coal becomes cost-competitive with oil priced at around 35 USD per barrel,[9] (break-even cost). This price, while above historical averages, is well below current oil prices. This makes coal a viable financial alternative to oil for the time being, although production is not great enough to make synfuels viable on a large scale.[10]
Among commercially mature technologies, advantage for
indirect coal liquefaction over direct coal liquefaction are reported by
Williams and Larson (2003). Estimates are reported for sites in China where
break-even cost for coal liquefaction may be in the range between 25 to 35
USD/barrel of oil.
Harmful effects
Coal mining
Coal mining causes a number of harmful effects. When coal
surfaces are exposed, the sulfur in the coal comes in contact with water and
air and forms sulfuric acid. As water drains from the mine, the acid moves
into the waterways, and as long as rain falls on the mine tailings the
sulfuric acid production continues, whether or not the mine is still
operating. If the coal is strip mined, the entire exposed seam leaches
sulfuric acid, leaving the infertile subsoil on the surface and begins to
pollute streams by acidifying and killing fish, plants, and aquatic animals
who are sensitive to drastic pH shifts.
By the late 1930s, it was estimated that American coal
mines produced about 2.5 million tons of sulfuric acid annually. In the Ohio
River Basin, where twelve hundred operating coal mines drained an estimated
annual 1.5 million tons of sulfuric acid into the waters in the 1960s and
thousands of abandoned coal mines leached acid as well. In Pennsylvania
alone, mine drainage had blighted 2,000 stream miles by 1967.
Coal burning
Combustion of coal, like any other fossil fuel, produces
carbon dioxide (CO2) and nitrogen oxides (NOx) along with varying amounts of
sulfur dioxide (SO2) depending on where it was mined. Sulfur dioxide reacts
with oxygen to form sulfur trioxide (SO3), which then reacts with water to
form sulfuric acid (see Acid anhydride for more information). The sulfuric
acid is returned to the Earth as acid rain.
Emissions from coal-fired power plants represent the
largest source of carbon dioxide emissions, which have been implicated as the
primary cause of global warming. Coal mining and abandoned mines also emit
methane, another cause of global warming. Since the carbon content of coal is
much higher than oil, burning coal is a more serious threat to the stability
of the global climate, as this carbon forms CO2 when burned. Many other
pollutants are present in coal power station emissions, as solid coal is more
difficult to clean than oil, which is refined before use. A study
commissioned by environmental groups claims that coal power plant emissions
are responsible for tens of thousands of premature deaths annually in the
United States alone. Modern power plants utilize a variety of techniques to
limit the harmfulness of their waste products and improve the efficiency of
burning, though these techniques are not subject to standard testing or
regulation in the U.S. and are not widely implemented in some countries, as
they add to the capital cost of the power plant. To eliminate CO2 emissions
from coal plants, carbon capture and storage has been proposed but has yet to
be commercially used.
Coal and coal waste products including fly ash, bottom
ash, boiler slag, and Flue Gas desulferization contain many heavy metals,
including arsenic, lead, mercury, nickel, vanadium, beryllium, cadmium,
barium, chromium, copper, molybdenum, zinc, selenium and radium, which are
dangerous if released into the environment. Coal also contains low levels of
uranium, thorium, and other naturally-occurring radioactive isotopes whose
release into the environment may lead to radioactive contamination. While
these substances are trace impurities, enough coal is burned that significant
amounts of these substances are released, paradoxically resulting in more
radioactive waste than nuclear power plants.
Due to its scientifically accepted connection with climate
change [1], the world's reliance on coal as an energy source, and health
concerns in areas with poor air pollution controls, The Economist recently
labeled the burning of coal "Environmental Enemy No. 1."
Energy density
The energy density of coal is roughly 24 Megajoules per
kilogram. It is perhaps more useful to put this into another unit of energy,
kilowatt-hours. This is the unit that electricity is most commonly sold in.
In that case, the energy density of coal is 6.67 kW-h/kg.
One can put this information to use to figure out how much
coal is needed to power things. For example, running one 100 Watt computer
for one year requires this much electricity:
100 W × 24 h × 365 {days in a year} = 876000 W-h = 876 kW-h
A typical Thermodynamic efficiency of coal power plants is
about 30%. Of the 6.67 kW-h of energy per kilogram of coal, about 30% of that
can successfully be turned into electricity - the rest is waste heat. Coal
power plants obtain approximately 2.0 kW-h per kg of burned coal.
Plugging in this information one finds how much coal must
be burned to power a typical computer for one year:
It takes 967 pounds of coal to power a computer for one
full year.
Relative Carbon Cost
Because coal is at least 50% carbon (by mass), then 1 kg
of coal contains at least 0.5 kg of carbon, which is where 1 mol is
equal to NA (Avogadro Number) particles. This combines with oxygen in the
atmosphere during combustion, producing carbon dioxide, with an atomic weight
of (12 + 16 × 2 = mass(CO2) = 44 kg/kmol). of CO2 is produced from
the present in every kilogram of coal, which once trapped in CO2 weighs
approximately .
This fact can be used to put a carbon-cost of energy on
the use of coal power. Since the useful energy output of coal is about 30% of
the 6.67 kW-h/kg(coal), we can say about 2 kW-h/kg(coal) of energy is
produced. Since 1 kg coal roughly translates as 1.83 kg of CO2, we can say
that using electricity from coal produces CO2 at a rate of about 0.915
kg(CO2) / kW-h, or about 0.254 kg(CO2) / MJ.
Coal fires
There are hundreds of coal fires burning around the world.
Those burning underground can be difficult to locate and many cannot be extinguished.
Fires can cause the ground above to subside, combustion gases are dangerous
to life, and breaking out to the surface can initiate surface wildfires. See
also Mine fire.
Coal seams can be set on fire by spontaneous combustion or
contact with a mine fire or surface fire. A grass fire in a coal area can set
dozens of coal seams on fire. Coal fires in China burn 120 million tons of
coal a year, emitting 360 million metric tons of carbon dioxide. This amounts
to 2-3% of the annual worldwide production of CO2 from fossil fuels, or as
much as emitted from all of the cars and light trucks in the United States.
In Centralia, Pennsylvania (a borough located in the Coal
Region of the United States) an exposed vein of coal ignited in 1962 due to a
trash fire in the borough landfill, located in an abandoned anthracite strip
mine pit. Attempts to extinguish the fire were unsuccessful, and it continues
to burn underground to this day.
The reddish siltstone rock that caps many ridges and
buttes in the Powder River Basin (Wyoming), and in western North Dakota is
called porcelanite, which also may resemble the coal burning waste
"clinker" or volcanic "scoria." Clinker is rock that has
been fused by the natural burning of coal. In the case of the Powder River Basin
approximately 27 to 54 billion metric tons of coal burned within the past
three million years. Wild coal fires in the area were reported by the Lewis
and Clark Expedition as well as explorers and settlers in the area.
The Australian Burning Mountain was originally believed to
be a volcano, but the smoke and ash comes from a coal fire which may have
been burning for over 5,500 years.
World coal reserves
US coal regionsIn 1996 it was estimated that there was
around one exagram (1 × 1015 kg or 1 trillion tonnes) of total coal reserves
accessible using current mining technology, approximately half of it being
hard coal. The energy value of all the world's coal is 290 zettajoules. At
the current global consumption of 15 terrawatt, there is enough coal to
provide the entire planet with all of its energy for 600 years.
British Petroleum, in its annual report 2006, estimated at
2005 end, there were 909,064 million tons of proven coal reserves worldwide,
or 155 years reserve to production ratio. This figure only includes reserves
classified as 'proven', exploration drilling programs by mining companies,
particularly in under-explored areas, are continually providing new reserves.
In many cases, companies are aware of coal deposits that have not been sufficiently
drilled to qualify as 'proven.' There is, therefore, much more recoverable
coal in the world than indicated by proven reserve figures.
The United States Department of Energy uses estimates of
coal reserves in the region of 1,081,279 million short tons, which is about
4,786 BBOE (billion barrels of oil equivalent). The amount of coal burned
during 2001 was calculated as 2.337 GTOE (gigatonnes of oil equivalent),
which is about 46 million barrels of oil equivalent per day .[30] Were
consumption to continue at that rate those reserves would last about 285
years. As a comparison natural gas provided 51 million barrels (oil
equivalent), and oil 76 million barrels, per day during 2001.
Of the 3 fossil fuels coal has the most widely distributed
reserves, and coal is mined in over 100 countries, and on all continents
except Antarctica. The largest reserves are found in the USA, Russia,
Australia, China, India and South Africa.
Proved recoverable coal reserves at end-1999 (million
tonnes)
Country Bituminous (including
anthracite) Sub- bituminous Lignite
TOTAL
United States of America 115891 101021 33082 249994
Russian Federation 49088 97472 10450 157010
China 62200 33700 18600 114500
India 82396 2000 84396
Australia 42550 1840 37700 82090
Germany 23000 43000 66000
South Africa 49520 49520
Ukraine 16274 15946 1933 34153
Kazakhstan 31000 3000 34000
Poland 20300 1860 22160
Serbia, Montenegro 64 1460 14732 16256
Brazil 11929 11929
Colombia 6267 381 6648
Canada 3471 871 2236 6578
Czech Republic 2114 3414 150 5678
Indonesia 790 1430 3150 5370
Botswana 4300 4300
Uzbekistan 1000 3000 4000
Turkey 278 761 2650 3689
Greece 2874 2874
Bulgaria 13 233 2465 2711
Pakistan 2265 2265
Iran (Islamic Rep.) 1710 1710
United Kingdom 1000 500 1500
Romania 1 35 1421 1457
Thailand 1268 1268
Mexico 860 300 51 1211
Chile 31 1150 1181
Hungary 80 1017 1097
Peru 960 100 1060
Kyrgyzstan 812 812
Japan 773 773
Spain 200 400 60 660
Korea (Democratic People's Rep.) 300 300 600
New Zealand 33 206 333 572
Zimbabwe 502 502
Netherlands 497 497
Venezuela 479 479
Argentina 430 430
Philippines 232 100 332
Slovenia 40 235 275
Mozambique 212 212
Swaziland 208 208
Tanzania 200 200
Nigeria 21 169 190
Greenland 183 183
Slovakia 172 172
Vietnam 150 150
Congo (Democratic Rep.) 88 88
Korea (Republic) 78 78
Niger 70 70
Afghanistan 66 66
Algeria 40 40
Croatia 6 33 39
Portugal 3 33 36
France 22 14 36
Italy 27 7 34
Austria 25 25
Ecuador 24 24
Egypt (Arab Rep.) 22 22
Ireland 14 14
Zambia 10 10
Malaysia 4 4
Central African Republic 3 3
Myanmar (Burma) 2 2
Malawi 2 2
New Caledonia 2 2
Nepal 2 2
Bolivia 1 1
Norway 1 1
Taiwan 1 1
Sweden 1 1
TOTAL 519062 276301 189090 984453
Major Coal Exporters
Exports of Coal by Country and year (million tonnes)
Country 2003 2004
Australia 238.1 247.6
United States 43.0 48.0
South Africa 78.7 74.9
Former Soviet Union 41.0 55.7
Poland 16.4 16.3
Canada 27.7 28.8
China 103.4 95.5
South America 57.8 65.9
Indonesia 107.8 131.4
Total 713.9 764.0
Related topics @ Wikipedia
Energy: world resources and consumption
Charcoal
Clean coal
Coal assay
Coal dust
Coal Measure (stratigraphic unit)
Coal mining
Coal-tar
World Coal Institute
Energy value of coal
Fluidized bed combustion
Future energy development
Granular material
History of coal mining
List of environment topics
Major coal producing regions
References
(2005) The Face of Decline: The Pennsylvania Anthracite Region in the Twentieth Century. Cornell University Press. ISBN 0-8014-8473-1.
Rottenberg, Dan (2003). In the Kingdom of Coal; An American Family and the Rock That Changed the World. Routledge. ISBN 0-415-93522-9.
Robert H. Williams and Eric D. Larson (December 2003). "A comparison of direct and indirect liquefaction technologies for making fluid fuels from coal" (PDF). Energy for Sustainable Development VII: 103-129.
Outwater, Alice (1996). Water: A Natural History. New York, NY: Basic Books. ISBN 0-465-03780-1.
Smith, Duane A. (May 1993). Mining America: The Industry
and the Environment, 1800-1980 (in English). Lawrence, KS: University Press
of Kansas, 210. ISBN 0870813064.
Notes
^ a b Britannica 2004: Coal mining: ancient use of outcropping coal.
^ Salway, Peter (2001): A History of Roman Britain. Oxford University Press.
^ Forbes, R J (1966): Studies in Ancient Technology. Brill Academic Publishers, Boston.
^ International Energy Outlook. Retrieved on September 9, 2005.
^ [http://www.powergeneration.siemens.com/download/pool/PGE2005_BalancingEconomics.pdf Balancing economics and environmental friendliness - the challenge for supercritical coal-fired power plants with highest steam parameters in the future] (PDF). Retrieved on 2006-10-23.
^ Cleaner Coal Technology Programme (October 1999). "Technology Status Report 010: Coal Liquefaction". Department of Trade and Industry (UK). Retrieved on November 23.
^ Phillip A. Lowe, Wilburn C. Schroeder, Anthony L. Liccardi (1976). "Technical Economies, Synfuels and Coal Energy Symposium, Solid-Phase Catalytic Coal Liquefaction Process". The American Society of Mechanical Engineers.
^ http://www.rexresearch.com/karrick/karric~1.htm. Retrieved on September 9, 2005.
^ Diesel Fuel News: Ultra-clean fuels from coal liquefaction: China about to launch big projects - Brief Article. Retrieved on September 9, 2005.
^ Welcome to Coal People Magazine. Retrieved on September 9, 2005.
^ Deadly power plants? Study fuels debate. Retrieved on September 4, 2006.
^ Coal Combustion. Retrieved on September 9, 2005.
^ Radioactive Elements in Coal and Fly Ash, USGS Factsheet 163-97. Retrieved on September 9, 2005.
^ Coal Combustion: Nuclear Resource or Danger. Retrieved on October 16, 2006.
^ Environmental enemy No. 1. Retrieved on September 4, 2006.
^ Elert, Glenn. Energy Density of Coal. The Physics Factbook. Retrieved on 2006-08-25.
^ A similar result, using a lightbulb instead, see
How much coal is required to run a 100-watt light bulb 24 hours a day for a year?. Howstuffworks. Retrieved on 2006-08-25.
^ Sino German Coal fire project. Retrieved on September 9, 2005.
^ Committee on Resources-Index. Retrieved on September 9, 2005.
^ http://www.fire.blm.gov/textdocuments/6-27-03.pdf. Retrieved on September 9, 2005.
^ EHP 110-5, 2002: Forum. Retrieved on September 9, 2005.
^ Overview about ITC's activities in China. Retrieved on September 9, 2005.
^ North Dakota's Clinker. Retrieved on September 9, 2005.
^ BLM-Environmental Education- The High Plains. Retrieved on September 9, 2005.
^ http://www.wsgs.uwyo.edu/Coal/CR01-1.pdf. Retrieved on September 9, 2005.
^ Burning Mountain Nature Reserve. Retrieved on September 9, 2005.
^ Sustainable Energy" 2005 page 303 The MIT Press by Jefferson W. Tester et al. ISBN 0-262-20153-4
^ BP2006 energy report, and US EIA 2006 overview
^ International Energy Annual 2003: Reserves. Retrieved on September 9, 2005.
^ IEA Publications Bookshop. Retrieved on September 9, 2005.
Retrieved from http://en.wikipedia.org/wiki/Coal
Notes:- We’d like to regularly add more useful content and web resources to Oilgae.com. Should you know of any good web resource for Biodiesel production from algae, do let us know by sending a note to [narsi]@[esource].[in] (remove [ ] for the email address). Many thanks for your patience.
- All content at Oilgae are available for reproduction and
usage under the GNU Free Documentation License. Please see explanation
at the end of this page for more details.
Add Links/Submit Links: Do you have a web resource that belongs to here? If you have a
web site that you wish to include in this page, do let us know the details by
sending a note about your URL to [narsi]@[esource].[in] to add URL (pl remove
the [ ] to get my email address!). We’ll quickly review the web site, and if
found relevant, add it to the database. Thanks!
Oilgae.com content is available under
GNU Free Documentation License: All content at
Oilgae.com is licensed under the GNU Free Documentation (GFDL). Put simply,
under this license, anyone is free to copy & use any amount of content
@ Oilgae.com, make changes to it and use it in any way they wish, as long
as they also allow the same rights to anyone else for this content and give
credits to Oilgae by giving a link to the specific page/s from where the
content was taken (a mention of Oilgae.com and a brief description about the
site is enough for offline usage). Put not so simply, see the
Oilgae.com GNU Free Documentation
License .
This page uses material
from the Wikipedia article Coal
About Oilgae - Oilgae - Oil & Biodiesel from Algae
has a focus on biodiesel production from algae while also discussing alternative
energy in general. Algae present an exciting possibility as a feedstock for
biodiesel, and when you realise that oil was originally formed from algae
- among others - you think "Hey! Why not oil again from algae!"
To facilitate exploration of oil production from algae as well as exploration
of other alternative energy avenues, Oilgae provides web links, directory,
and related resources for algae-based biofuels / biodiesel along with inputs
on new inventions, discoveries & breakthroughs in other alternative
energy domains such as Solar Wind nuclear, hydro, Geothermal hydrogen
& fuel cells, gravitational, geothemal, human-powered, ocean & Wave /
Tidal energy.






