Oilgae Club - an Online Community for Algae Fuel Enthusiasts Worldwide.

Backyard Photobioreactor. 3

Parts list
1. 5 gal Bucket with lid

2. 1-50' coil of clear acrylic tubing 3/4"ID 7/8" OD

3. 1 piece 1/2" hardware cloth. 24" x 36"

4. 1 package zip ties.

5. 1 Large aquarium air pump.

total $75.00

Coil hardware cloth around lid 1" inside of lid edge. Coil tubing around hardware cloth. zip tie wire to lid zip tie tubing to wire. Leave enough tubing at bottom to reach bottom of bucket. tubing at top will belong enough to use as return line to bucket. place air hose inside tubing near the bottom of bucket. Water will rise about 18"as the air bubbles rise. To harvest cut tubing near the top of coil incert funnel with coffee filter or simular filter connect bottom of funnel to return line. part 2
Thu August 05 2010 03:04:34 AM by Larsyn 1771 views

Comments - 3

  • Emily wrote:
    Thu August 05 2010 10:20:18 AM

    Can u send a photo of your pbr ?

    Vote Up! 1 Vote Down! 0

  • Larsyn wrote:
    Thu August 05 2010 02:11:24 PM

    can not figure out how to includee photo. I can send if I have email address.

    Vote Up! 0 Vote Down! 0

  • Paulo wrote:
    Sat March 05 2011 01:04:36 PM

    I would like to receive information or photos in my e-mail

    paulobhz@hotmail.com

    Thanks

    Vote Up! 0 Vote Down! 0

Login to Post a Comment