Oilgae Club - an Online Community for Algae Fuel Enthusiasts Worldwide.

Oil Extraction from Scenedesmus obliquus 25

Oil Extraction from Scenedesmus obliquus Using a Continuous Microwave System ? Design, Optimization and Quality Characterization

Sundar Balasubramaniana, James D. Allena, Akanksha Kanitkara and Dorin Boldor,

a Department of Biological and Agricultural Engineering, Louisiana State University Agricultural Center, Baton Rouge, LA 70803
Received 26 July 2010;  revised 28 September 2010;  accepted 30 September 2010.  Available online 8 October 2010.


A 1.2 kW, 2450 MHz resonant continuous microwave processing system was designed and optimized for oil extraction from green algae (Scenedesmus obliquus). Algae-water suspension (1:1 w/w) was heated to 80 and 95?C and subjected to extraction for up to 30 min.


Maximum oil yield was achieved at 95?C and 30 min. The microwave system extracted 76-77% of total recoverable oil at 20-30 min and 95?C, compared to only 43-47% for water bath control. Extraction time and temperature had significant influence (p<0.0001) on extraction yield. Oil analysis indicated that microwaves extracted oil containing higher percentages of unsaturated and essential fatty acids (indicating higher quality).


This study validates for the first time the efficiency of a continuous microwave system for extraction of lipids from algae. Higher oil yields, faster extraction rates and superior oil quality demonstrate this system?s feasibility for oil extraction from a variety of feedstock.

Mon October 18 2010 07:18:55 AM by Richard Scenedesmus obliquus  |  oil extraction 2038 views
Login to Post a Comment